Adb Install For Mac

 
  1. Install Mac Os X
  2. Install Adb Mac Catalina
  3. Adb Driver Installer 9.0 Mb
  4. Adb-install-mac.sh
  5. Adb Download Mac

Today we will teach you on how to download and install ADB drivers on windows and MAC. First of all, we know about ADB? The ADB is also known as Android Debug Bridge which is a command line tool. Google offers the ADB tool for developers to debug various parts of their applications. Also, the ADB tool allows your laptop/ PC to communicate with your Android device and then you can perform many tasks. Once you can download and install drivers on windows and MAC, then you will be able to flash custom ROMs, modify, update your phone’s firmware and so on. So if you are willing to install ADB drivers on windows and MAC. Here we share a detailed guide for you.

Download ADB Driver for Windows, Linux & Mac iOS There was a time when people used to get USB not recognized errors when they try to establish a connection between a computer and an external smartphone device. Sudo apt-get install android-tools-adb. After the installation, connect your Android phone with a USB cable and allow USB debugging and proceed further. How To Use ADB Service. Once you have installed ADB service in Windows, Mac, Linux, and Chrome operating systems, you can use the below commands.

Download And Install ADB Drivers On Windows And MAC

If you are tired with your old OS or you want to full potential, so you can install the custom firmware or root your device. Then you must require some ADB commands and at that time you need these ADB drivers on your windows and MAC. Installing the ADB command is not an easy task but no need to worry about that. We come with a simple step by step guide on how to install ADB drivers on windows and MAC. There are many guides available for download and install ADB, but most of them are not working or out of date. Today in this article given below we share the latest ADB drivers’ link. You can just download and extract it on your PC and enjoy.

It is fact that the ADB tool is one of the best and most important tools for developers and also for advanced users who would want to tweak their Android. So now without wasting any time we are going to download and install ADB drivers on windows and MAC. By following given below simple instructions.

  1. First, go to the settings option on your device and scroll down and tap on About device.
  2. Find the “Build Number” and tap 7 times to enable Developer Mode. You will see a pop-up toast when the Developer Mode is enabled.
  3. Now Enable USB Debugging mode option.
  4. You are partially done with setting up your device. Now head to the tutorial below on how to install ADB for your particular operating system.
  1. Download the ADB ZIP file for Windows and extract the files into an easily accessible folder (like C:adb)
  2. Open the Windows Explorer and navigate the folder where you had extracted the contents from the ADB ZIP file.
  3. Now, open Command Prompt on the same directory as ADB binary. Press the SHIFT key and right-click on an empty space. Select “Open PowerShell window here” or “Open command window here” from the pop-up menu.
  4. Connect your device to PC using the official USB cable (provided by device brand). You should change the USB mode to “file transfer (MTP)” mode. Some device may or may not required this, but for compatibility, it’s always good to select MTP mode.
  5. In Command Prompt Window, type “adb devices” and hit enter to launch the ADB daemon.
  6. On your device screen, you will see a prompt to allow or cancel USB Debugging access. Tap on “OK” to allow USB debugging. You may check the “Always Allow for this computer” option if you never want to see this pop-up again.
  7. Finally, re-enter the command from Step #5. If everything is successful, you should see the device serial number on the Command Prompt screen.
For
  1. Download the ADB tool for MACOS.
  2. Extract the content of the downloaded “platform-tools-latest-darwin.zip” file to an easily accessible location on your PC, inside a folder named “adb” (For ease of access).
  3. We prefer to have it on Desktop. So now, all the platform tools package content i.e. the binaries will be present in “/Desktop/adb/”.
  4. Go to the Launchpad and open Terminal.
  5. You will now need to direct it to the location where ADB and other binary files are present. So enter the following command:
  6. Example:
  7. Now that your Terminal is directed to use this location, you can connect your device to the PC via USB cable.
  8. Enter the following command to initiate an ADB connection with your Android device.
  9. As soon as you enter the command, the device will be prompted with a message to allow USB debugging. The Terminal will also display the device serial along with an “unauthorized” message.
  10. So agree to the message and allow the connection. Then enter the “adb devices” command again to have a successful connection between your PC and device over ADB.

ADB or Android Debug Bridge is a command line tool that enables you to communicate with an Android device. ADB basically consists of two applications—one running on your computer (Windows, Linux or Mac) and the other running on your Android device. With ADB you can control your device from a computer that is connected via a USB cable or even Wifi. It is a very versatile tool which lets you move files back and forth, install/uninstall apps, run shell commands, and more. Although not everyone appears comfortable with the command line tools such as ADB yet it can be very useful especially if you love to tweak your Android device. For some newbies, it could be difficult to install and setup the ADB tool on their computers. Therefore, we have decided to come up with a general guide to help you install and setup ADB on Windows, Mac and Linux.

Install Mac Os X

Adb Install For Mac

Installing ADB on a computer is quite simple nowadays. There was a time when you had to go through the lengthy procedure of installing the Android SDK tools to install the ADB. However, now that you have a simple installation package, you can easily install an setup ADB on Windows, Mac and Linux. All you need now is to download the installer package and install it on your computer. For your ease, we have provided the links for the ADB installer package for Windows, Mac and Linux. In addition to that, we have also listed the necessary instructions to setup the ADB on Windows, Mac and Linux.

Early Preparations

In order to setup the ADB, you will have to enable developer options on your smartphone or tablet. To enable;

  1. Navigate to Settings > About Device.
  2. Tap the number 7 times. It will enable developer options.
  3. Head back to Settings > Developer Options.
  4. Tap on USB Debugging option to enable it.

How to Setup ADB on Windows

Install Adb Mac Catalina

  1. Head over to the link and download the ADB zip file for Windows. → Download ADB
  2. Extract the zip file into an easily accessible folder.
  3. Navigate to the folder where you extracted the ZIP file.
  4. In the folder containing the contents of the zip file, open up a Command Prompt.
  5. To open, hold Shift and Right-click within the folder then click the “open command prompt here” option. (Windows 10 users will have “PowerShell” instead of “command prompt”)
  6. Now connect your smartphone or tablet to your computer with a USB cable.
  7. Change the USB mode to “file transfer (MTP)” mode. (some OEMs doesn’t require this)
  8. In the Command Prompt window, enter the following command: adb devices
  9. On your smartphone, you’ll see a message asking whether to allow or deny USB debugging. Grant the access.
  10. That’s it.

How to Setup ADB on Mac

  1. Use the link and download the ADB zip file for Mac. → Download ADB
  2. Extract the contents of zip file to an easily accessible folder.
  3. Now open Terminal.
  4. To browse to the folder you extracted ADB into, enter the following command: cd /path/to/extracted/folder/
  5. Connect your device to your Mac via a USB cable.
  6. Change the USB connection mode to “file transfer (MTP)” mode. (not required for every device)
  7. Once the Terminal is in the same folder your ADB tools are in, execute the following command to launch the ADB: adb devices
  8. On your smartphone, you’ll see a prompt asking whether to allow or deny USB debugging. Grant the access.
  9. That’s it.

How to Setup ADB on Linux

Adb Driver Installer 9.0 Mb

  1. Head over to the provided link and download ADB zip file for Linux. → Download ADB
  2. Extract the zip file to an easily accessible location (e.g Desktop).
  3. Open a Terminal window and enter the following command: cd /path/to/extracted/folder/
  4. This will change the directory to where you extracted the ADB files.
  5. Connect your device to your Linux machine via a USB cable.
  6. Change the connection mode to “file transfer (MTP)” mode. (not required for every device)
  7. Once the Terminal is in the same folder your ADB tools are in, execute the following command to launch the ADB: adb devices
  8. On your smartphone/tablet, you’ll see a prompt asking whether to allow or deny USB debugging. Grant the access.
  9. That’s it.

Adb-install-mac.sh

If you are facing any issue, let us know via comments.

Adb Download Mac

Related